
Strapping Selection Guide
November 16, 2026
ISO 9001 certification: surveillance audit closed with no non-conformities
November 20, 2026Are you considering a change of PET or PP strapping, trying to solve a strapping problem, or looking to cut your consumption? ExcelPlast Tunisia supports you from the first analysis of your needs to your first order: sample, load study, trial on your own equipment.
In short: you send us a sample and a description of your loads, we suggest a suitable grade, and you validate it on your machine before ordering.
1. Start from your current strapping and your experience
A sample of the strapping you use today, with its technical data sheet if you have one, is the best starting point. It lets us study its characteristics and match them to your application.
Do you see breaks under tension, welding difficulties, variations in width or thickness, or uneven unwinding on your machine? Your feedback shows us what to improve, while keeping the characteristics that already work for you.
2. Understand the load and the strapping conditions
The right strapping depends on the whole application: type and weight of the load, pallet stability, number of straps, equipment, and handling, storage and transport conditions.
To complete the study, please send us:
- photos of your strapped loads;
- the model of your strapping machine and the settings you use;
- the type (PET or PP) and width of your current strapping;
- the difficulties you encounter.
A problem can come from the strapping, but also from machine settings, equipment condition or working conditions. We look at these factors together.
3. Look for the performance your application needs
The analysis may lead us to propose a grade with better strength, weldability or dimensional consistency. It can also reveal room for optimisation: when your current strapping exceeds what the application requires in size or performance, a grade that uses less material can be considered.
Any change is validated against strap strength, weld quality and how the strapped load behaves in real conditions. To compare materials before the study, see our strapping range.
4. Compare the cost-in-use of your strapping
The price per coil or per metre does not tell you the full cost of a strapping. A useful comparison looks at four criteria:
| Criterion | What we compare |
|---|---|
| Length | Metres available per coil |
| Length per load | Strapping used per pallet or strapped load |
| Number of straps | Straps needed to stabilise the load |
| Losses and stoppages | Breaks, downtime and waste seen in use |
An optimised grade can offer more metres per coil or remove unnecessary consumption. Potential savings are calculated per pallet or per strapped load, from comparable data, and confirmed by trials, while keeping the performance your application requires.
5. Validate the solution on your equipment
For the grade to be tested, we specify the material (PET or PP), dimensions, target performance, surface finish, core and coil format. Sample shipping and the trial programme are agreed with our team.
The trial checks:
- how the coil unwinds;
- how the strap runs through the machine;
- tensioning;
- weld quality.
Depending on the application, it is completed by an observation after handling, storage or transport. For loads shipped by road, two references go further: the EUMOS 40509 method for assessing the rigidity of load units, and the European Best Practice Guidelines on Cargo Securing.

Settings are adapted to the strapping under test and follow the equipment manufacturer’s recommendations. Your observations, photos and videos help us analyse the results and, if needed, refine the grade or plan further trials.
6. Prepare your first order
Once your teams have validated the grade, the first order confirms how it behaves over a more representative period of use. The selected characteristics, coil format, packaging, quantities and delivery terms are set before launch.
Frequently asked questions
What should I send to start the study? A sample of your current strapping with its technical data sheet if available, a description of your loads, your machine model and your settings.
How does the trial work? Sample shipping and the trial programme are agreed with our team. The trial covers unwinding, machine run, tensioning and weld quality, sometimes completed after handling, storage or transport.
Can I reduce my strapping consumption? When your current strapping exceeds what your application needs in size or performance, a grade that uses less material can be considered, then validated by trial.
How are the savings calculated? Per pallet or per strapped load, from comparable data, and confirmed by trials.
Want to assess or optimise your strapping?
Send us a sample of your current product, the difficulties you encounter and a description of your loads. We will work with you on a suitable solution and on ways to optimise your consumption.
Tel. +216 72 668 520 · commercial.support@excelplastunisie.com · or via the Contact page.




